Continuous mesh belt furnaces are the right choice for processes with fixed cycle times such as drying or pre-heating, curing or degassing, etc. The furnaces are available for various temperatures up to a maximum of 1100 °C. The furnace design depends on the required throughput, the process requirements for heat treatment and the required cycle time. The conveyor speed and the number of control zones are defined by the process specifications.
Electric conveyor ovens for heat treatment and stress relieving springs
The annealing furnace is floor-mounted continuous mesh-belt electric furnace for stress relieving silicon iron transformer cores in an air atmosphere an optimum temperature of 800-850 °C.
Electrical heated pusher furnace for sintering under the forming gas atmosphere.
Furnace is self-standing, masive made. High-quality multi-layer insulation – Aluoxyd plates, calcium silica plates, ceramic fiber and mat and high temperature bricks. Insulation provide minimal energy losses. Combined belt and plates slide and push system with Lenze drive technology. Carrier plates from ceramics.
Continuous belt furnace, electrical heated, for hardeners and annealing under the nitrogen atmosphere. Furnace is self-standing, masive made. High-quality multi-layer insulation – aluoxyd plates, calcium silica plates, ceramic fiber and mat and high temperature bricks. Insulation provide minimal energy losses. Slide belt system with Lenze drive technology.
Chamber is hermetically closed and sealed, and constructed from two zone-preheating and heating. Chamber is made of welded heat resistant steel up to 1200°C. Freely radiating heating elements placed on supporting tubes are placed around chamber. Heating elements from Kanthal A1.